Top 3 Tips to Boost Mechanical Seal Life at Slurry Pumps
Mechanical Seals are a Short Component in Slurry Pumping System, But Its Play Important Role Between Pump Failure and Success.
Choosing the Wrong or Faulty Seal Can do Serious Damage to Your System. So it is Important to Initially Choose the Appropriate Seal for Long-Term Performance.
The Internals of a Slurry Pump is Specially Designed to Handle Difficult Challenge. Special Impeller and Pump Liners are Used to Deal with Erosion, But what About their Mechanical Seals?
Slurry Pumps are not Just Ole Pumps – They Are Assigned to Pump Some Highly Corrosive Fluids. From Compost to Cement and Starch, These Pumps Usually Run Out of Work for them.
Don’t Worry About the Application a Lubricant Film is Always Needed in the Roof Interface. A Film May Also Increase the Thickness Leakage and Low Specificity Between the Faces, Which will Increase the Wear by Rubbing.
A Film that is too thin will Produce Heat and Upgrade Material. Capping Sealing was Interface Cool and Clean will Upgrade Long Year’s Life.
Here we Explain the Top Three Tips that Selecting a Mechanical Seal for a Slurry Pump.
1. Importance of Mechanical Seals Design
It is Important to Understand Methods of Forming Mechanical Seals. Such a One Technique Still Widely Used is Gland Packing.
A Few Basic Characteristics that are Common to any Good Mechanical Seals Design.
- Protected Springs
- Balanced Design
- Monolithic Seal Faces
- Non-Fretting Design
- stationery Design
Generally Heavy Slurry Include High Solid Content, For this Reason, You Should Choose a Seal Design that Can Withstand these Erosion Effects While Protecting the Seal Faces.
2. Limitations of Bushings
The Bushing is Pump to the Bottom of the Stuffing Box and Provides a Close Tolerance Clearance Around the Pump Shaft.
Pumping a Slurry Mixture then Process Pressure will Normally Move the Fluid Filled Particle Inside it Sealing Interface Causing Abrasion and Accelerated Wear.
3.Flush of Mechanical Seals
A Flushing is the Better Plan For Cooling and Cleaning the Mechanical Seals. It’s Also Keeps Things Moving in the Stuffing Box to Block Solids Stagnation and Grow Up.
There are Many Methods for Implementing Seal Flush, You Should Always Avoid Dry Running Conditions.
The Mechanical Seals that Come on the Slurry Pump are Often Overlooked. Not Only it is Important to Choose the Right Seal for Your Pump Industry, But it is Also Important for Proper Maintenance of Your Pump so that the Mechanical Seal and Other Internal Parts are Long-Lasting Life.
To Know More About Mechanical Seals Service Read Our Blog Post on Mechanical Seal Face Materials for Abrasive Services or For More General Slurring Pumping Information, Check Out Our Slurry Mechanical Seals Product.
Microseals Is ISO 9001:2015 Certified Company and Leading Mechanical Seals Manufacturer & Supplier In India, Providing Leakages Solutions To All Types Of Pump Applications By Manufacturing Mechanical Seals And Sealing Components As Per Customer’s Require, Samples or Need. To Know More About Mechanical Seal Call On +91 – 9029035767 Or Email At [email protected]